ZJ50/3150D DRILLING RIG EQUIPMENT_Product info_SCR & VFD Drive control system parts drilling rig|electric parts|oil field|Mud Tank|generator|spare parts|Xian joton petroleum Electrical Technogies Co,.Ltd

ZJ50/3150D DRILLING RIG EQUIPMENT

2016-07-06 15:49 Click：times

Bitmap

ZJ50/3150D

Main Specificition
主参数

•rig123.net' target='_blank'>Rig nominal rig123.net' target='_blank'>Drilling capacity: 4500m( 5" DP ）; 5000m(4-1/2"DP)

•Max. hook load: 3150 kN

•Max. input power of Drawworks:1600kW

•Wireline dia. : Φ35mm(1- 3/8")

•Opening diameter of rotary table: 37-1/2"

•Max lines strung (forward): 12

•Mast height: 45m

•Height of drill floor: 9m; Clearance height of drill floor: 7.62m; Drill floor area:12m×10.31m

•Travelling system: 6x7; OD of sheave of traveling system:1270mm

•Transmission mode: AC-DC-AC(VFD)

•Number of main diesel engine generator sets×Power each: 3×1200kW

•Mud pump: 2×F1600(1600HP); Drive type: AC motor

ZJ50/3150DB drilling rig is designed and manufactured in accordance with China National Standard “Type and Basic Parameters of Drilling Rig” and International Standards. All main components are in compliance with appropriate API Specifications. This kind of drilling rig is suitable for drilling exploration and development oil , nature gas and geothermal well in depth rating to 5000 meters with 114mm (4-1/2") drill pipe.
•Fully meet 5000 meter (16,400ft ) drilling process requirements;　
• Drawworks, Rotary table and Mud pumps are driven by AC motors.
•This drilling rig mainly consists of crown block, traveling block, hook, swivel, rotary table, drawworks, mud pumps, mast and substructure that all are in compliance with API specifications.
•Drawworks is driven by AC motor, with lebus grooving, to be equipped with Crown-O-Matic.
•Independent rotary table driven by one suitable AC motor
•All equipment on the drill floor is installed at lower position. Utilizing power of drawworks to raise both mast and substructure to the work position.

Item
序号

Description
名称

Technical Specification
技术参数

Model
型号

Qty.
数量

Unit
单位

Total Price（RMB）

Remarks
备注

Section1: Hoisting Equipment 提升系统

1.1

Mast assy
井架

K-Style mast consists of four (4) sections pinned up steel structure.                                                                                  •Conform to API -4F                                                                    • Available height : 45m
•Static hook load capacity : 3150kN
• Width of top (face/side) : 2.1×2.05m
•Width of bottom : 8m
•Height of racking platform : 24.5, 25.5, 26.5m
• Wind Load Rating:
No hook load, full set back load   : 30.7m/s
No hook load, no stand : 38.6m/s                                       •Lifting and lowering mast : 16.5m/s

JJ315/45-K

set

1.1.1

Mast accessories
井架附件

Anti-droping device 防坠落装置

set

Escaping device on racking board 逃生装置

USA , Geronimo

set

Hydraulic casing stabbing board 套管扶正台

YFZ20/4-6-C

set

Buffer cylinder 缓冲油缸

HSGK01-160/110E-5121-550×420

set

dead line protector 死绳护绳器

set

Raising wire rope起升大绳

φ62 L=46930mm

pcs

hydraulic jack 液压千斤

50T

set

tongs sheave 大钳滑轮

pcs

counterweights 平衡重

set

ladder climbing assistance device.登梯助力装置

pcs

Standpipe operating board立管操作台

set

1.1.2

Racking board
二层台

2 sets 0.5 ton air winch on racking board to aid the Derrick man handles the drill collar. Racking board with chains on all fingers, safety grip walkway.

set

1.1.3

Deadline anchor
死绳固定器

horizontal type, Located on off-driller’s side.
Completed with a tension weight sensor.
• Drum is grooved for 1-3/8” drilling line.
•Output pressure: 6Mpa
•Max working load : 340kN

JZG34A

set

1.2

Substructure assy
底座

SLingshot、parallelogram sturcutre including top,middle-level and bottom floor. All the equipments can be located in a low positon on the drill floor. •Conform to API- 4F •Floor height : 9m
• Clear height : 7.62m
•Rig floor area : 12.66×10.31m
•Max. load capacity : 3150kN
•Setback capacity (simultaneous) : 15000 ft 5” DP( including 6stands 8”DC+2stands 9 ½″DC)
•Setback load capacity : 1800kN

DZ315/9-S

set

1.2.1

Substructure acessories
底座附件

Buffer cylinder 缓冲油缸

HSGK01-160/90E-1111-700×1135

set

Raising wire rope起升大绳

Φ66 L=42950mm

pcs

Ladder 梯子

pcs

Escaping slide way 逃生滑道

pcs

V-door V道

set

Air storage tank 储气罐

4m³

pcs

1.2.2

Catwalk 猫道

Catwalk consists of two sections. 5T air winch is installed on the second section.

10000×1624×1070mm

set

1.2.3

Pipe rack钻杆架

Two set of pipe rack are placed each side of each section.

set

1.2.4

BOP suspending device
防喷器吊装装置

•Max. hoist rating:    2×250=500 kN                                           •Max.hosit travel length: 4.8m
•Max.hosit speed:      2.2m/min
•Max.loweing speed:   3m/min
•Max.working pressure: 15MPa
•OD.of steel line:   φ28mm

FY-50Y/4.8

set

1.3

Drawworks
绞车

•Conform to API-7K • Max. Input power : 1600 kW •Max. fast line pull: 340kN
• Drive motor : 2 x 800 kW AC motor
•No. of Drum : Single
• Line Groove: Lebus 1-3/8”
•Transmission : 1 stepless change
•Main brake : Hydraulic disc brake.
• Auxiliary brake : dynamic braking

JC50DB

set

1.3.1

Hydraulic disc brake
液压盘刹

•Consists of 4 working clamps and 2 safty clamps
• Rated pressure: 8.5Mpa
• Single side max. positive pressure force of working clamps : 75kN •Single side max. positive pressure force of safty clamp: 90kN • Cooling type: wind

PSZ75

set

1.3.2

Motor for drawworks
绞车电机

•Rated Power : 800 kW
•Rated Voltage : 600 V
•Rated Current     : 618 A
•Rated Rotating Speed    : 794 RPM
•Rated Torque : 7162N.m
• Max. Rotating Speed   : 1984RPM(100HZ)
•Insulation Class : 200
•Protection Class   : Positive pressure IP54

YJ13A1X4

set

1.3.3

Automatic driller
自动送钻装置

Automatic driller consists of motor, reducer , cluth,etc, which can raise mast and substruture independently. Atomatic driller also can be driven by its own motor, not driven by drawworks motor.                                                           specification of automatic driller motor.                                               •Rated Power : 45 kW
• Rated Voltage : 400 V
• Rated Current   : 88.4 A
• Rated Rotating Speed    : 1480 RPM
• Rated Torque : 286N.m
• Rated frequency: 50HZ                                                       • Max.frequency: 100HZ                                                         specification of Reducer:                                                                                • Type: K157                                                                              • Reduction gear ratio: 86.34                                              • Max. output torque: 18000Nm

set

1.3.4

Dynamic braking system能耗制动

• Rated power: 6×400kW • Cooling way: forced air cooling

set

1.3.5

Cooling system
绞车冷却系统

mainly consists of water tanks, water supply system,pipeline,etc, whicn can cool the reducer.

set

1.3.5.1

Cooling water tank
冷却水罐

11500 mm × 2800 mm × 2600 mm

pcs

1.3.5.2

Centrifuge pump
离心泵

KSL80/160-7.5/2

pcs

1.3.5.3

Pipeline of cooling water
冷却管线

connect to drawworks

set

1.4

Crown Block
天车

Consists of frame, main sheave and shaft assembly complete with rope jump guards, and fast line sheave, which can satisfy the installation of TDS. • Conform to API- 4F/8A • Max.static load: 3150kN; • Number of sheaves: 6+1 ; • OD of main sheave: Φ1270mm; • OD of guidance sheave: Φ1524mm; • Dia. of wire line: 1-3/8"(Φ35mm ); • OD of bailing sheave: Φ610mm; • Dia of bailing wire line: Φ14.5mm. •No.of auxiliary sheaves：2

TC315

set

1.5

Travelling Block
游车

• Conform to API- 8A • Max.static load: 3150kN; • Number of sheaves: 6 ; • OD of main sheave: Φ1270mm; • OD of sheave shaft : Φ254mm; • Dia. of wire line: 1-3/8"(Φ35mm ); • Dimension: 2680×1350×974mm

YC315

set

1.6

Hook大钩

• Max.static load: 3150kN; • Spring travel: 200mm; • Opening size of main hook: 220mm; • Opening size of secondary hook: 120mm; • Dimension: 2953×890×830mm

DG315

set

1.7

Rotary drill line
钢丝绳

1-3/8"(Φ35mm) L=1200m

6×19S+IWRC

set

1.8

Hydraulic spooler
液压倒绳机

• Rated pressure: 16Mpa; • Rated fow: 20L/Min; • Output torque: 9000N. m; • Output speed: 0~5r/min; • pulling speed : 0-20m/min • Max. torque of coiling block: 0-20r/min; • pullling length: 600m • Dimension: 3000×2180×1860mm

YDS-14/5-Y

set

Section 2: Rotary System 旋转系统

2.1

Swivel
水龙头

•Conform to API Spec 8A                                                  •Max.static load       4500kN
•Max.dynamic load                         2800kN
•Max.speed       300r/min
•Max.working pressure      35MPa
• Inner dia.of center pipe       75mm
•Joint thread（connect center pipe）    API / 7 ⅝″ Reg.LH
•to Kelly API / 6 ⅝″ Reg.LH
•Thread of connecting pipe between grooseneck and hose 4″－8thead/inch API Std 5B
•pneumatic motor model      FMS-20
•Rated speed       280r/min
•Rated air pressure 0.6～0.8MPa
•Rated power       14.7kW
•air consumption       17m3/min
•Air pipe       1 ½″
• Rated spinning speed      92r/min
•Max.spinning torque      3000Nm                   •Dimensions: 3015×1096×1065(mm)
•Weight:3461kg

SL450－5

set

2.2

Rotary Table and RT Driven Device转盘和转盘驱动装置

2.2.1

Rotary Table 转盘

• Comply with API Spec 7k      •Max.static load 5850kN
•Dia of through hole        Φ952.5mm（37.5″）         •Max.speed         300r/min
•Gear ratio     3.56
•Rotary speed                0～257r/min
•Max.working torque         32362N.m

ZP375

set

2.2.2

RT Motor 转盘电机

•Rated power        600kW
•Rated voltage       600V
•Rated current       605 A
•Fundamental wave power factor      0.88
•Rated speed       660 r/min
•Fundamental frequency        33.5 Hz
•Rated torque      8673Nm
•Max.current     1.5 times of rated current
•Max.torque      1.5 tiems of rated torque
（corresponding 61Hz）
•Max. frequency       75Hz
•Isolation grade       200
•Poles No.        6
•Stator winding wiring way     Y
•Cooling method forced air cooling（with fan）
•Working type     continuous
•Protection class      IP54

YJ23

set

2.2.3

RT Dirven Device
转盘驱动装置

•Chain box transmission ratio        i＝1.158
•Gear   stepless speed regulating
•Inertial braking clutch     2-LT500/125T
•Main motor model           YJ600/600-23
•Main motor rated power/voltage 600kW/600V
•Lubrication method      splash

set

2.2.4

RT Bushing
转盘补心

20″(for runing 20″casing)

set

13 3/8″(for runing13 3/8″casing)

set

9 5/8″(for runing9 5/8″casing)

set

8 5/8″(for drilling)

set

Master bushing

set

lifting bail

set

Hexagonal roller kelly bushing 5 1/4″

set

Hexagonal roller kelly bushing 3 1/2″

set

Section 3: High Pressure Mud Circulation System

3.1

Mud pump package 泥浆泵组

3.1.1

Mud pump 泥浆泵

•Conform to API Spec 7K                                             •Triplex Single Acting
•Max.ID of liner and strike    Φ180×305mm
•Rated Strikes            120s/min
•Rated power              1176kW（1600HP）
•Transmission Manner      Herringbone Gear
•Gear ratio               4.206:1
•Lubrication              Enforced and Splashed
•Valve Size      API7#
•Liner cover     Screw type
•Liner lock      Screw lock
•Piston strike       305mm
•Max.inner dia.of liner      Φ180mm
•Max.working pressure     34.3MPa
•Max. Flow Discharge    （130s/min）   50.42L/s
•Discharge Pipe      127mm（5″）
•Suction Pipe      304mm（12″）

KLF-1600

set

3.1.2

Mud pump motor
泥浆泵电机

•Rated power       1200kW
•Rated voltage       600V
•Fundamental wave power factor      0.848
•Rated speed       1000 r/min
•Fundamental frequency         50.5 Hz
•Rated torque       10520Nm
• overload current      1.5 times of rated current
• ovverload torque       1.5 times of rated torque
• Max.speed on constant power      1500r/min（corresponding 76Hz）
•Max.frequency       76Hz
•Isolation grade       200
•Poles NO.        6
•Stator winding wiring way     Y
•Cooling method forced air cooling（with fan）
•Working type     continuous

YJ31E2X1

set

3.1.3

Mud pump transmission device
泥浆泵传动装置

•Transmission type     single motor connecting V-belt
•Transmission power            1200KW
•Belt type       4×25J-8500
•Transmission ratio           1.981
•Dimensions     8500×2580×2800
•Weight           40000KG

set

3.1.4

Discharge pump
灌注泵

• Motor model        YB225M-4
• Rated power            45KW
• Rated speed       1750r/min
•Spray pump model        32PL
•Rated power           2.2KW

SB6”×8”

set

3.2

Drilling Fluid manifold 管汇

•Max.working pressure       35MPa
•Nominal dia.       Φ102mm（4″）
•Working temperature range       －40℃～＋121℃

set

3.3

Rotary hose水龙带

•Working pressure 35Mpa
•Length 19m/23m

Section 4 Low Pressure Mud Circulation System 低压泥浆循环系统

4.1

Mud tanks
泥浆罐

•Effective volume：about 258m3
• Rate pressure of recycling pipeline：4MPa
•Rated pressure of water pipeline：0.5MPa
•Weight system capacity：200 m3/h
•Solid control equipment capacity：≥50L/S
•Mud suction pipeline size：12″

set

4.1.1

Shale shaker tank
振动罐

11500 mm × 2800 mm × 2600 mm

4.1.2

Intermediate tank
中间罐

11000 mm × 2800 mm × 2600 mm

4.1.3

Suction tank 吸入罐

11000 mm × 2800 mm × 2600 mm

4.1.4

Weight tank加重罐

11000 mm × 2800 mm × 2600 mm

4.1.5

Store tank储藏罐

11000 mm × 2800 mm × 2600 mm

4.2

Automatic water supply tank 水罐

11000 mm × 2800 mm × 2600 mm

1+1

4.3

Poor boy
液气分离器

•Working pressure     1.6Mpa
•Max.capacity             240m3/h
•length                        6000mm

Φ1200

set

4.4

Shale shaker
振动筛

Max.capacity             60L/s
Screen dimensio       2.52 ㎡
Vibrating strength       7.3G
Motor power               2×2.5HP
Rotary spee              1500r/min
Weight                       4537lbs

DERRICK ,USA FLO-LINE CLEANER-503-3P

4.5

Vacuum degasser
除气器

ZCQ1.5/5

set

4.6

Mud cleaner
除砂除泥一体机

•Working pressure         0.2-0.4Mpa
•Capacity            200m3／h
•Desander cone        250×2
•Min.separation particles      40-60μm
•Desilter cone      100×10
•Min.separation particles     10-44μm

ZQJ-1

set

4.7

Mid-speed centrifuge
中速离心机

•Capacity: 40m³/h; • Rotary speed:3200 RPM • Main motor power: 30kW • Auxiliary motor power: 7.5kW • Dimension:2900*1800*1320

LW450-842NA

set

4.8

High-speed centrifuge
高速离心机

•Capacity: 40m³/h; • Rotary speed:1650-2200 RPM • Main motor power: 18.5kW • Auxiliary motor power: 5.5kW • Dimension:2440*1740*1300

GLW355-1250NA

set

4.9

Sand pump砂泵

•Inlet dia.        Φ200mm
•Outlet dia.       Φ150mm
•Max.capactiy    220-270m3/h
•Motor power           55KW

150NSP

pcs

4.10

Shear pump剪切泵

•Inlet dia.       Φ200mm
•Outlet dia.       Φ150mm
•Max.capactiy      160m3/h
•Motor power           55KW

JQB-1

pcs

4.11

Agitator 搅拌器

•Rotary speed　　　　58rpm
•Dia.of impeller Φ800mm
•Motor power 11KW

LZNJ-11

set

Agitator搅拌器

•Rotary speed　　　　58rpm
•Dia.of impeller Φ400mm
•Motor power 2.2KW

WHNJ-2.2

set

4.12

Mud gun泥浆枪

2" Pressure 4.0Mpa

set

4.13

Make-up pump
补给泵

•Dia.of inlet       Φ100mm
•Dia.of outlet       Φ80mm
•Max.capactiy        80m3/h
•Motor power           11KW

SB3×4J-9 1/2 11KW

set

4.14

Jet flow mixer
射流器

• Dia of inlet:            Φ150mm
• Dia of outlet :         Φ150mm
• Volume of inlet :   150m3/h
• Motor power:        55KW

XLH-200

pcs

4.15

Centrifugal pump
离心泵

•Dia.of inlet                      Φ80mm
•Dia.of outlet                   Φ65mm
•Flow    　　　         28m3/h
•Motor power                     7.5KW
•delivery head                      32m

KSL80/160-7.5/2

set

4.16

Electric jib crane
吊臂

Lifting capacity 2T

set

4.17

Duty room 值班房

set

Section 5 Power & Air Supply System 动力及气源系统

5.1

Engine 主发电机组

•Rated output power:     1200kW
•Rated frequencyr:         50Hz
•Rated voltager:             600V
•Rated current r:           1828A
•Rated rotary speedr:    1500r/min
•Starting moder:            Pneumatic motor starting
•Generator mode r:        SR4B

CAT3512B

set

5.2

Auxiliary generator
辅助发电机组

•Rated output power       400kW
•Rated frequency            50Hz
•Rated voltage                400V
•Rated rotary speed       1500r/min
•Starting mode              electric

VOLVO

set

5.3

Generator house
发电机房

•It is a integrated structure, which includes generators and air supply system.

（L×W×H）10600×3000m×3100m

set

5.4

Oil supply system
供油系统

consists of 2pcs of oil tanks, piplines, and some necessary euipments. oil tank: Qty.:2 pcs; Volume: (30+30)m³

1+1

set

5.4.1

Oil pipline 油路管线

set

5.5

Air supply system
气源系统

consists of 2sets screw compressore, 1set of dyer, 2 sets of storage tank ,and necessary pipelines.                     • Air storage tank   capacity: 2.5m3+4m³( one storage tank volume is 2.5m³，the other is 4m³ located in the substructure.)
• Rated system working pressure:         1MPa
• Main air pipeline:     2″

5.5.1

Screw compressor
螺杆压缩机

• Rated displacement       5.5m3/min
• Rated pressure       1MPa
• Power        37kW
• Dimensions      1800mm×1220mm×1600mm
• Weight        940kg

LS-12-50HH

set

5.5.2

Refrigeration Dryer
干燥机

•Rated capacity 6m3/min

SRC240

set

5.5.3

Air accumulator气罐

• Volume 2.5m3
• Rated working pressure 1MPa

set

5.5.4

Cold start 冷启动

set

5.5.5

Main air pipeline
气管线

• Dia.of pipeline 2″
• Working pressure 1.2MPa

set

5.5.6

Air filter 空气滤清器

• Rated working pressure 1.2MPa
• Rated capacity 6m3/min

pcs

Section 6: Electrical Control System 电控系统

6.1

Electric control room

• Equiped with air conditioner, dehumidification system, lighting sytem, emergency lighting system, warning sytem, earthing device, overhaul plug-in, in-out connection unit, etc

set

6.1.1

Generator control cabinet

• Control and protection for the main circuit of the generators in the 3 set of Diesel Generator Set
• Main breaker adopted ABB product

set

6.1.2

Synchronizing cabinet

• Achieve paralleling of 3 set of Generator Set

set

6.1.3

Retification cabinet

ABB ACS800

set

6.1.4

Drawworks speed regulation cabinet

• Rated output power :      1160KVA
• Rated output current :            953A
• Output voltage :                   0～600V
• Max.output frequency              200Hz
• Operation mode :          4 quadrant, dynamic braking

ABB ACS800

set

6.1.5

Mud pump speed regulation cabinet

• Rated output power                       1740KVA
• Rated output current                        1414A
• Output voltage                                  0～600V
• Max.output frequency                       300Hz
• Operation mode                   4 quadrant, dynamic braking

ABB ACS800

set

6.1.6

Rotary table speed regulation cabinet

• Rated output power                       1160KVA
• Rated output current                        953A
• Output voltage                                  0～600V
• Max.output frequency                       200Hz
• Operation mode                   4 quadrant, dynamic braking

ABB ACS800

set

6.1.7

Brake unit

• Max.short time brake power(one set) 404kW (1min/5min)

NBRA669

set

6.1.8

Switch cabinet

• Consist of transformer primary breaker, transformer twice side breaker and auxiliary generator coil-in breaker • Main breaker adpoted ABB product

set

6.1.9

MCC cabinet

• Supply power for fan of AC-VF motor and drilling floor electricity
• GCS drawer structure, motor control unit consist of breaker, switch, thermal relay
• Main electronic component adopted Schneider product

set

6.1.10

Dry type transformer

• Rated capacity 1250 kVA
• High/low rated voltage 600V / 400V

set

6.1.11

Air conditioner

TRANE

set

6.1.12

Auto-drilling control system

• Rated voltage 3AC400V
• Rated power 45kW

ABB ACS800 / SIEMENS

set

6.1.13

Multiple cabinet

• Ther control system adopted PLC programmable control system.
• Equiped with UPS power source，is able to supply emergency power supply for the control system.

SIEMENS STEP-7 300

set

6.1.14

Brake resistance

• 6*400kW • Including brake resistance of mud pump, drawwoks, rotary table and auto-driling

set

6.1.15

Cable & connector

• Max.voltage 2000V • Communication cable adopted SIEMENS product • Other cables adopted YCW product

set

6.2

Cable tray

• Connecting the roof of VFD room

set

Section 7: Wellsite Lighting System 井电系统

7.1

Well lighting system
井电

including the following power supply : solid control( mud tank),mast,substructure,drill floor,oil tank,water tank, and relevant lightings •Rated voltage: 380V/220V; •Rated frequency: 50HZ; •Ambient temperature: -20℃-+50℃; •Relative Humidity: 20℃(≤90%)
•Altitude: ≤2000m

set

7.1.1

Lamps 灯具

The drilling floor lighting is concentrated in a distribution box installed on the drilling floor. The lamps adopted stainless steel fluorescent, the lamp tubes adopted single-foot fast start fluorescent tubes. One set of lamp equipped with two single-foot tubes. Ex-proof obstruction lamp(red/ strobe)-1 pc, Ex-proof spot lamp-12pcs, all the fluorescent installed on the mast with anti-fall chain.

set

7.1.2

Cables电缆

set

7.2

Cable tray 电缆槽

cable tray are as follows: •between generator and mud pump; •solid contro area; •from ground to drill floor;

set

Section 8: Driller Control System 司钻控制系统

8.1

Driller control room控制房

8.1.1

Gas control cabinet

set

8.1.2

Electric control cabinet

set

8.1.3

Emergency work station

set

8.1.4

disc brake work station

set

8.2

Drilling instrument system 仪表系统

set

8.3

Monitoring system
监控系统

Monitoring system consists of image pickup system, display system, and control system. •Monitoring system can restore 8 hours video Documents. •mage pickup system has nine cameras; •Display system has two monitors. The monitor can simultaneous display nine pictures, which can also switch any one of them.

set

8.4

Communication system 通讯系统

Communication system •mainly includes the following intercom system: racking board, driller control room, pump room, mud tank area, and supervisor, which consists of public address system, microphone, telephonel, UPS, etc. including 6interphones and 5 proof-telephones without host.

set

Section 9: Drill floor tools 钻台工具

9.1

Hydraulic Power unit
液压站

It is fixed in the dog house,and can proivde hydraulic pressure for the following equipments: hydraulic power tongs, winch, buffer cylinder, hydraulic cathead,etc.It can be also power source for other hydeaulic facilities. Specification: Main pump unit: •Rated flow: 120L/min; •Rated pressure: 20Mpa; •Engine power:37kW; Petrol pump unit •Rated flow: 40-60L/min; •Rated pressure:16.6Mpa; •Engine power:3kW;

YZBS-120LD-3

set

9.2

Hydraulic cathead
液压猫头

It can be used with tongs stably, and the traction can be adjusted according to operational requirements.
•Rated pressure: 16MPa; •Rated traction: 160kN

YM-16B

pcs

9.3

Hydraulic winch
液压绞车

•Rated pressure: 16MPa
•Rated flow： 40L/min
•Dimenstion: 550×418×395mm

HW3-2000A

pcs

9.4

Hydraulic Winch for records测斜绞车

It is used for measuring drilling depth and inclination, with counting device.
•Max. measuring drilling depth:6000m, 7000m •Power:7.5kW

CJ6000 (F)

set

9.5

Hydraulic power tongs 动力钳

ZQ203-100

pcs

9.6

B-type tongs 大钳

Q86-324/75

set

9.7

Link elevator 吊环

250t, 2 3/4 “ x 108"

set

500t, 3 ½" x 144"

set

9.8

Air winch
气动小绞车

Rated lifting load: 5T

QJ-5

pcs

•Rated lifting load: 0.5T; •Rated powe: 2.6kW

QF-0.5

pcs

9.9

Threader 穿绳器

φ35

pcs

9.10

Hydraulic cutter
剪绳器

Max. diameter of cutting line: 48 mm

YB-48

set

9.11

Inflator充气机

1-0.27/150A

set

Section 10: Doghouse 偏房

10.1

Doghouse

Doghouse consists of left doghouse and right doghouse

10.1.1

Left doghouse
左偏房

•Left doghouse: There are two rooms in the left doghouse. One for rest rooms for the driller with 1.5P air conditioning, electric heater, tables, stools,wardrobes,etc.
and the other for the hydraulic station room with exhaust fan and two windows.

10000×2800×2800

set

10.1.2

Right doghouse
右偏房

•Right doghouse: there are two rooms in the right doghouse. One for the repair room with tool kit, bench, 1.5P air conditioning, exhaust fan ,etc. ,the other for the Storage tool room with lights

10000×2800×2800

set

Section 11: Auxiliary equipment 辅助设备

11.1

Rotary table mat
转盘防滑垫

set

11.2

Assembly parts
总装配件

including necessary fittings and shields

set

11.3

Hoisting rigging
吊装锁具

11.4

Mechanical jack

16T

set

Operation and Maintenance Manual

set

Installation&commissioning Fee in factory

set

Painting and Packing

set

TAG：

上一篇：ZJ30CZ-04 rotary gear
下一篇：XJ750 truck-mounted drilling rig