Your locationhome > Product > Plc & inverter Drive >

ABB brake chopper

update2015-03-22 11:51      Clicktimes
  • brand   
  • model   
  • describe

    Xian ABB brake chopper Brake chopper ACS800 drive the whole series, have built-in braking chopper and supporting. Therefore, no additional space and the installation time. Dimension R2 - R3 and 690 R4 built-in brake chopper V as the standar

introduce
Xi'an ABB brake chopper

Brake chopper

ACS800 drive the whole series, have built-in braking chopper and supporting. Therefore, no additional space and the installation time. Dimension R2 - R3 and 690

R4 built-in brake chopper V as the standard configuration. Transmission products in other dimensions, braking chopper is optional.

ACS800 integrates brake control, so the drive unit can control braking process monitoring, fault state of the system, the braking process detection, such as brake resistor and preparation

The dynamic resistance of the cable short circuit, chopper short-circuit and calculation of braking resistance temperature etc..

Braking resistor

SACE/SAFUR brake resistance independent of all ACS800 models. Can use standard brake resistors, braking resistor can also use non - standard, but resistance

Energy is lower than the prescribed value in a table, and must have sufficient heat dissipation capability.

In the ACS800 element, if the following conditions are met, in the brake circuit does not need to fuse individual:

- - ACS800 main circuit of fuse protection.

- - no circuit cable / fuse oversizing occurs

һƪ ACS800-104-0580-7+E205+V991, Code: 3ABD68685192-D

һƪRMIO-11 RMIO-12 board

more